Lifetime Free Update TPMS Tool LAUNCH CRT5011E Newest TPMS Relearn Tool Support 315/ 433MHz TPMS Sensor, Read/Activate/Programming/Relearn/Reset/Key Fob Test

Product Description

LAUNCH CRT5011E Newest TPMS Relearn Tool Support 315/ 433MHz TPMS Sensor, Read/Activate/Programming/Relearn/Reset/Key Fob Test

Launch CRT5011E tire pressure sensor reset tool code reader & diagnostic tool is specially developed by LAUNCH, which enables users to trigger TPMS sensor, program TPMS sensor, perform the relearning procedure and check sensor part number. Additionally, it also supports all 10 modes as OBD2 scanner for a complete diagnosis.

With built-in help menus and code definitions, diagnosing and repairing that dreaded Check Warning Light is now easier than ever!



Launch CRT5011E TPMS Tool Highlights:

• LAUNCH CRT5011E is a powerful and versatile tpms & obdii 2-in-1 tool. 
• Launch CRT5011E can program the sensor by receiving multi-frequency 315MHz/433MHz.
• LAUNCH CRT5011E TPMS Relearn Tool can easily activate most of the known OEM TPMS sensors.
• Free Lifetime Upgraded, You can update your CRT5011E from your PC at any time without any cost
• Besides writing the Sensor ID into ECU, it can read sensor ECU ID from TPMS. CRT5011E also supports the diagnosis of 99% of the models on the market.
• CRT5011E tpms tool supports 10 languages: English, French, Russian, German, Italian, Japanese, Korean, Spanish, Portuguese, Chinese. You can configure the system language of the tool to your preference language.

Launch CRT5011E TPMS programming tool functions:

1. TPMS:

Activate and match with all 315 MHz / 433 MHz tire pressure sensors
Reset, relearn and reprogram tire pressure sensors fast
Diagnose the tire pressure issues and turn off the warning light by relearning and programming your new tire pressure sensor.
Reprogramming LAUNCH LTR01 sensors AND other Unencrypted sensors with unlimited times
Read tire pressure, tire temperature and battery status accurately
Reprogram up to 8 sensors at one time
Provide TPMS relearning procedures and sensor OE number lookup
Multiple ID generation methods: Automatic creation/Manual creation/Copy ID by Activation/Copy by OBD/Creat Multi-sensor (1-8)

2. Full OBD diagnosis:

Read dynamic data streams and MIL/Read readiness status/Freeze frame data/Read DTCs/Clear DTCs/O2 sensor test/On-board monitor test/Read vehicle information, etc.

Please connect the OBD2 port and start the engine before use.
Note: For indirect TPMS vehicles, only the Relearning function is supported. For vehicles using Direct TPMS, it generally includes Activation, Programming and Relearning. The available TPMS functions may vary for different vehicles being serviced.


Why do you need Launch CRT5011E obd2 scanner with tpms relearn?

Tire Pressure Monitoring helps drivers to properly maintain their vehicle tires, improves vehicle safety and fuel efficiency. 33,000 crashes are a result of under-inflated tires. 75% of roadside flats are caused by a slow leak or under inflation. 35% of drivers admit to never checking tire pressure. NHTSA estimates TPMS could save as many as 660 lives annually. What will you do when you notice the illuminated TPMS warning light？

✘ - Ignoring the warning light will cause you are risking tire failure or even serious injury.

✘ - Going to the workshops for a comprehensive check is effective, but it will cost more than your budget.

✔ - LAUNCH CRT5011E costs little of the money to check TPMS in a workshop and it can perform the same professional functions as well.




5 Modes to Program Launch LTR01 Sensors and Other Unencrypted Sensors

The Launch CRT5011E TPMS sensor programmer tool can program all Launch LTR01 sensors and Other Unencrypted Sensors, including 315MHz and 433MHz, to replace damaged sensors.
CRT5011E has 5 modes to program Launch LTR01 Sensors and Other Unencrypted Sensors:

• Auto Create: This function is designed to program the LAUNCH-sensor by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID. Select the wheel which needs to be programmed on the tool, place a LAUNCH-sensor close to the TPMS antenna of the tool, and select CREATE SENSOR to create a new random sensor ID.
• Manual Create: This function allows users to manually enter sensor ID. Users can enter the random ID or the original sensor ID, if it is available.
• Copy ID by activation: It can get tire pressure sensor ID when the tire sensor is working normally, you can write in the retrieved original sensor data to the LAUNCH-sensor. It is used after the original sensor is triggered.
• Copy by OBD: Firstly, you need to perform a Read ID from Vehicle in the Relearn function, which reads the sensor ID from the vehicle ECU. It can be used if the sensor is damaged and the original ID is saved in the vehicle system. You can use it to get the old sensor ID stored in ECU, and write it directly into your LAUNCH RF-sensor.
• Creat Multi-sensor 1-8: This function allows users to program multiple sensors simultaneously. Up to 8 sensors can be programmed at the same time.

Launch CRT5011E TPMS Tool can activate 315/433 MHz Sensors

TPMS Sensor Activate:

Launch CRT5011E TPMS Diagnostic Tool allows users to activate TPMS sensor to view sensor data such as sensor ID, tire pressure, tire frequency, tire temperature, battery condition(voltage).

TPMS Relearn:

Stationary Relearn: Require the vehicle to be placed in the “Learn Mode”, follow the screen instruction to activate sensors, and perform stationary relearn.
OBDII Relearn: Allow the CRT5011E to directly write TPMS sensor IDs to the TPMS module via the OBD connector.
Auto Relearn: You can complete relearning by driving and refer to the on-screen Relearn Procedure for the exact details of the process.
Due to different car models, OBDII Relearn, Stationary Relearn, and Auto Relearn may not exist at the same time. Some models have all 3 relearn methods, but some models may only have one or two relearn methods.




!!! Attention >>>>>>>

1. LAUNCH CRT5011E TPMS Relearn Tool is specially designed to diagnose electronic control systems of 12V vehicles. Please note that it is NOT suitable for a six-wheeled dual-rear car.
2. For early magnet-activated sensors, place the magnet over the stem and then place the tool alongside the valve stem.
3. If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate the tire and place the tool alongside the stem while pressing the button.

!!! If you want to activate/check/read the tire pressure sensor, please point the CRT5011E TPMS Tool within 30cm of the sensor.

!!! To activate/check/read the tire pressure sensor, please ensure that you have selected the correct car model, year and frequency of tpms sensor.

!!! If you cannot activate/check/read the tire pressure sensor, please try other car years and frequencies.

!!! If you still can't activate/check/read the tire pressure sensor, please try deflating the tires while activating it(Some models require).

!!! If it still fails to activate/check/read the sensor, PLEASE FEEDBACK Your Car Model, Year and Sensor OEM Part Number to us(sales@x431tool.com). 


Launch CRT5011E supports all 10 modes as an OBD2 scanner

                      

Full OBDII 10 Modes

This option presents a quick way to check for DTCs, isolate the cause of the illuminated Malfunction Indicator Lamp (MIL), check monitor status before emissions certification testing, verify repairs, and perform a number of other services that are emission-related.

Main Function:
1. Read/Clear DTCs
2. I/M Readiness Check
3. Freeze Frame Data Viewing
4. O2 Sensor Test
5. On-board Monitor Test
6. EVAP System Test
7. Live Data Stream Viewing
8. Vehicle Information
9. Component test

4 in 1 Live Data Stream

This option retrieves and displays live data and parameters from the vehicle’s ECU.
You can view up to four different kinds of data at the same time.

TPMS Service

This function includes two modules: Relearn Procedure and Part Number Lookup.

Relearn Procedure: Relearn operation applies only when the newly programmed sensor IDs are different from the original sensor IDs stored in the vehicle’s ECU. Relearn is used to write the newly programmed sensor IDs into the vehicle’s ECU for sensor recognition.
Part number lookup: It allows you to check the OE number of the sensors.

                      

Check Sensor

Please note that this feature is only available when you have upgraded your TPMS tool to the latest version.
You can use this option to get the Tire Sensor ID, Tire Pressure/Temperature, Voltage, Versione Boot,Programming File, Serial Number(SN).

Key Fob Test

Please note that this feature is only available when you have upgraded your TPMS tool to the latest version.

If you are tired of going to the dealer to test the signal strength of your key fob, key fob testing will be easy and convenient with the CRT5011E tpms relearn tool. When your key fob starts to run abnormally or stops working, this TPMS tool can check your key fob to make sure it is in the best condition.

Support 10 Languages

CRT5011E tpms tool supports 10 languages: English, French, Russian, German, Italian, Japanese, Korean, Spanish, Portuguese, Chinese. You can configure the system language of the tool to your preference language.  

---

Contact Information:

Email: sales@x431tool.com
Whatsapp: +86  18186426016


Scan x431tool.com QR code to order anywhere and anytime by mobile phone