Promotion Launch X431 Pro Mini Bluetooth with 2 years free update online powerful than diagun
Launch X431 Pro Mini Highlights:
- Launch X-431 PRO MINI is a Android-based vehicle trouble diagnostic tool, it achieves full car model and full system vehicle trouble diagnosis, which includes Reading DTCs, Clearing DTCs, Reading Data Stream,Actuation Test and Special Functions.
- Wi-Fi connection; one-click update online for 2 years free; perform remote diagnosis
THE WORLD SUPERIOR X-431:
LAUNCH X431 PRO MINI is a highly-portable, drop-tested and waterproof Android-based scan tool tablet with a 6.9" ultra-high resolution IPS touchscreen and an eight-hour battery life; Full system diagnosis is through a Class-1 Bluetooth connector for optimum wireless connectivity
EXTENSIVE VEHICLE COVERAGE + MULTI-LANGUAGE:
Launch X431 Pro Mini Diagnostic Tool supports all electric controlling system of EFI vehicles that covers Martha Lahti, Ferrari, Rolls-Royce, Bentley, Mercedes Benz, BMW, Audi etc up to 150 car brands, up to 10000 car models .
Multi-Languages: English, Arabic,Polish, German, Russian, French, Finnish, Dutch, Czech, Portuguese, Spanish, Hungarian, Italian, Japanese, Swedish, Turkish, Greek, Denish, Korea can be chosen for this product.
X431 Pro Original Bluetooth Distance: 10M (Without Obstacle)
POWERFUL SPECIAL FUNCTIONS:
SRS;ABS Bleeding;DPF Regeneration;Oil Reset Service;RESETGEAR;Battery Match;RESETIMMO;THROTTLE RESET;Brake Reset;TPMS;Steering Angle Calibration;Injection Reset; Electronic Parking Brake Reset,etc.which is very suitable for garage and mechanics.
Configures X-431 PRO MINI as an I/M (Instant Messaging) tool, which enables technicians to exchange repair experience and perform remote assistance more conveniently. You can diagnose cars anywhere!Save time and make your job easier!
LAUNCH SOLE AGENT :
Dealer Code: 755D/ 2 Years Free update/WiFi Update Online via One-Click update
After 2 years update fee is
399USD/year, 599USD/two years.
Dealer Code for Registration: 755D/Updating Website: www.dbscar.com/24 Hours Hassle-Free Technic Support
Launch X431 PRO MINI Description:
X-431 PRO MINI is a stylish Android-based vehicle trouble diagnostic tool. It inherits from LAUNCH’s advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.
Through the simple Bluetooth communication between the VCI module and X-431 PRO MINI, it achieves full car model and full system vehicle trouble diagnosis, which includes Reading DTCs, Clearing DTCs, Reading Data Stream,Actuation Test and Special Functions.
Moreover, it supports Wi-Fi connection, which enables you surf the Internet,update the diagnostic software online and perform remote diagnosis etc, getting your job fixed faster and easier.
Launch X431 PRO MINI Features
1. Diagnostic Tool:
Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. Diagnosis functions include: Read DTCs, Clear DTCs, Read data stream, Special functions etc.
Specially designed for Android platform with clear and user-friendly interface.
Via Bluetooth, it is simple for the VCI module to communicate with X-431 PRO MINI.
Equipped with an exclusive X-431 PRO MINI protective sleeve to prevent it from being damaged.
B. One-click Update:
Lets you update your diagnostic software more efficiently. To obtain better function and update service, advise you update the software regularly.
C. Repair Data:
provides abundant automotive handbook, repair case and wiring diagrams for reference and retrieval.
D. Remote Diagnosis:
configures X-431 PRO MINI as an I/M(Instant Messaging) tool, which enables technicians to exchange repair experience and perform remote assistance more conveniently.
built-in Wi-Fi module makes surfing on the internet freely.
allows you to send and receive emails.
to configure your personalized X-431 PRO MINI through it.
other android based applications can be customized to install or uninstall.
6. Special functions:
Launch X-431 PRO MINI can program and code the electronic control system of prevailing vehicle models, also perform special functions, including:
Oil Reset Service
Steering Angle Calibration
Electronic Parking Brake Reset
Battery Register / Battery Maintenance
Electronic Throttle Position Reset / Learn
Diesel Particulate Filter (DPF) Regeneration
Tire Pressure Monitor System Reset
Fuel Injector Coding
Launch X431 Pro Mini Vehicle Coverage
X-431 PRO MINI supports all electronic control systems on 12V EFI models, incl. more than 150 European, American and Asian models like Maserati, Ferrari, Rolls Royce, Bentley, Mercedes-Benz, BMW, Audi.Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. It achieves full car model and full system vehicle trouble diagnosis
X-431 PRO MINI whole set:
X-431 PRO MINI is mainly composed of an X-431 PRO MINI handset, and a DBSCar II VCI module.
X-431 PRO MINI handset
1 VCI module
2 Reset hole
3 Rear camera
4 Camera flash
5 Slot for VCI module For housing the VCI module.
6 POWER/Screen lock key In Off mode, press it to turn X-431 PRO MINI on; In On mode, turn X-431 PRO MINI off with long press or lock screen with short press.
7 Carry strap
8 Air intake vent
9 USB/Charging port To connect to the power adaptor for charging.
11 LCD screen
12 VOLUME +/- Key To adjust the volume. To print the screen, hold and press the POWER and VOLUME – key until a snapshot pops up on the screen.
The captured snapshot is saved in the “Screenshots” folder.
14 Front camera
15 Earphone Jack
Launch X431 Pro Mini Software Update:
Before diagnosing a vehicle, you have to download the corresponding vehiclediagnosis software.
Tap “Software Upgrade” to enter the update center.
Tap “Update” to start downloading. Once downloading is finished, the softwarepackages will be installed automatically
How to Connect Launch X431 Pro Mini to Vehicle:
Normal testing conditions
1.Turn on the vehicle power supply.
2.Vehicle battery voltage range should be 9-14 Volts.
3.Throttle should be in a closed position.
Select the VCI module
If X-431 PRO MINI is testing vehicles equipped with universal OBD II 16 PIN diagnostic socket, please use the included VCI module. (For vehicles with
non-OBD II 16 PIN diagnostic socket, a non-16 PIN connector is required.)
The DLC (Data Link Connector) is typically a standard 16-pin connector where diagnostic tools interface with a vehicle’s on-board control modules. The DLC is
usually located 12 inches from the center of the instrument panel, under or around the driver’s side for most vehicles. If DLC is not located under dashboard,
a label should be there telling location. For some Asian and European vehicles,the DLC is located behind the ashtray and the ashtray must be removed to
access the connector. If the DLC cannot be found, refer to the vehicle’s service manual.
The method used to connect the VCI module to a vehicle’s DLC depends on the vehicle’s configuration as follows:
1.A vehicle equipped with an OBD II management system supplies both communication and 12V power through a standardized DLC.
2.A vehicle not equipped with an OBD II management system supplies communication through a DLC connection, and in some cases supplies 12V power through the cigarette lighter receptacle or a connection to the vehicle battery.
Follow the steps mentioned below to connect OBD II vehicle:
1. Locate vehicle’s DLC socket.
2. Plug the VCI module into the vehicle’s DLC socket (It is suggested to use the
OBD II extension cable to connect the VCI module and DLC socket.).
3. Choose one of the two ways to obtain power from:
A. Power adaptor: Connect one end of the included power adaptor to DC IN port of X-431 PRO MINI tablet, and the other end to AC outlet.
B. Internal battery pack
For non-OBDII vehicle, proceed as follows:
- 1. Locate vehicle’s DLC socket.
- 2. Select the corresponding non-16pin connector.
- 3. Plug the non-16pin end of the connector into the DLC socket, then connect the other end to the OBD I adaptor, and then tighten the captive screws.
- 4. Connect the other end of the adaptor to the included VCI module.
- 5. To supply power to OBD I adaptor from:
- A. Cigarette Lighter cable(optional): Connect one end of the cigarette lightercable to vehicle’s cigarette lighter receptacle, and the other end to the power
B. Battery Clamps Cable: Connect one end of the battery clamps cable to vehicle’s battery, and the other end to the power jack of OBD I adaptor.
Launch X431 Pro Mini Package List:
While opening X-431 PRO MINI package for the first time, please carefully check the following components. Common accessories for each X-431 PRO MINI are same, but for different destinations, the accessories of X-431 PRO MINI may vary. Please consult from the local agency or check the package listsupplied with X-431 PRO MINI together.
- 1pc x X-431 PRO MINI tablet
- 1pc x Password envelope
- 1pc x VCI module (For connecting OBD II vehicles)
- 1pc x OBD II extension cable
- 1pc x OBD I adaptor (For connecting the non-16pin diagnostic connector and the VCI module)
- 1pc x Battery clamps cable
- 1pc x Power adaptors
- 1pc x Non-16pin connectors (For connecting non-OBD II vehicle)
Launch X431 Pro Mini FAQ:
1. How to save power?
a)Please turn off the screen while X-431 PRO MINI keeps idle.
b)Set a shorter standby time.
c)Decrease the brightness of the screen.
d)If WLAN connection is not required, please turn it off.
e)Disable GPS function if GPS service is not in use.
2. What should I do in case I forgot the screen lock?
You can set screen lock as pattern or password. If you forgot the password,please consult your device provider or reset your device.
Resetting may cause data loss. Before use, please make sure important data has been backed up.
3. How to do if the system runs slow?
In this case, please do the followings:
> Check all running applications and stop the unnecessary applications (Steps:Settings --> Apps --> Running --> Tap the desired application and then tap
> Check all installed applications, remove the unnecessary applications (Steps:Settings --> Apps --> Downloaded --> Tap the desired application and then tap
If all steps mentioned above are finished and the system still works slowly.
Please try to close the system and reboot your X-431 PRO MINI.
4. How to reset X-431 PRO MINI?
Resetting may cause data loss. Before doing so, please make sure important data
and information has been backed up.
Do the following to reset X-431 PRO MINI:
1. Tap “Settings” --> “Back & Reset”;
2. Tap “Factory data reset”;
3. Tap “Reset tablet”;
4. Tap “Clear all data” to start resetting until the tool automatically reboots.
6. Why some videos on the website can be not played?
It possibly results from:
1. The current browser does not support Flash playing;
2. Flash player does not support this video.
Try to use other browsers to watch it or install other Flash player.
7. The date and time of X-431 PRO MINI cannot be set.
It is because Automatic date & time is set on your X-431 PRO MINI. Tap “Settings” --> “Date & time”, deselect “Automatic date & time” and then set the
date and time manually. Since the diagnostic reports are saved and sorted by date, please make sure the system date and time is properly configured on this
Launch X431 Pro Mini Reviews:
By Terry on May 22.2017
I received my x431 pro mini today and set it up with the help from x431tool who gave fast and great service. I worked on three cars today with no problems at all from brake reset to tpms reset to injector replacement, turn out check engine light, work so SMOOTH.It is way more than i expected.Great all around scan tool for shop. Simple to use!
By Amos on April 28,2017
this new released Launch tool works perfect , with special function reset,including electronic throttle position reset.ABS bleeding , oil lamp reset , DPF , TPMS , ECT.With strong function.Besides, The customer Service from CarDiag is prompt and professional. Highly Recommend.
By Stephanie on May 4,2017
Got this X431 pro mini in a short time. Successfully registered and downloaded the corresponding software with the help of after-sale service. I have used it on my 2 automotives also my wife’s Audi. Found the troubles very accurately and solved most of them. A terrific unit at this price range.
Live Support: Chat with us online
Scan x431tool.com QR code to order anywhere and anytime by mobile phone
Step -by - step on how to use Launch X431 Pro Mini to diagnose & perform special functions on Toyota VITZ.
Model to diagnose and perform special functions:
Engine Type: IKRFE (Gasoline)
Cylinder number: 3
Toyota VITZ diagnostic tool to use:
Launch X431 Pro Mini (it's a professional diagnostic maintenance tool for workshop, paid $679 at www.x431tool.com)
Choose Area "Asia", then "Toyota"
Come to Toyota version V48.91, click "Submit"
Choose among 16pin DLC (Japan), 17Pin Toyota - 17DLC,17PiN Toyota - 17F or 22PIN DLC.
For example, choose "16pin DLC (Japan)", then come to "Automatically search" and "Manually search"
Choose between Belta and VITZ.
Choose year "08/2008 -11/2010
X431 pro mini read out vehicle information
Choose "System Scan".
You can see x431 pro mini can access to all systems very fast
Select Engine and ECT, then you can see all of X431 Pro mini functions incl.
Read fault code, clear fault memory, read data stream, actuation test, read freeze frame,oil reset
Choose "Read DTC" then clear them.
Back and check X431 Pro mini special function on Toyota.
Two options: "Auto search special function" and "All special function"
Choose "All special function" and I got many special functions (see below picture):