Launch X431 CNC-602A Injector Cleaner & Tester 110V
Product Description
LAUNCH X431 CNC-602A Injector Cleaner & Tester
We provide discounts shipping cost on LAUNCH X431 X431 CNC-602A, if you find shipping cost is too high when you place the order, please contact our customer service to get discounts forshipping cost.
LAUNCH X431 CNC-602A is only for gasoline vehicles, not for diesel.
Important notice: Because liquid can not be shipped by airmail, our CNC-602A does not contain injector test liquid and Injector detergent, you can purchase it from your local market. Please kindly consider. Liquid picture is for display.
Launch X431 CNC-602A Function:
Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
Auto test: To test injectors by simulating different working conditions.
On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
Launch X431 CNC-602A Techenical Parameter:
Power supply: AC220V±10%, 50/60Hz; AC110V±10%, 50/60Hz.
Ultrasonic cleaner power: 100W;
Input power: 250W;
Simulated RPM range: 10~9990rpm; step: 10rpm;
Time range: 1~9999s;
Pulse width: 0.5~25ms; step 0.1 ms;
Fuel tank capacity: 4700ml;
No. PartCode PartName
1 105020217 CNC pulse signal connection cable 1,T=0.5
2 105020218 CNC pulse signal connection cable 2,T=0.8
3 103260037 Ultrasonic cleaner assembly 100W
4 106030038 On-vehicle adaptor package(tool kits)
5 107010428 CNC-602A user manual(En&Ch)
6 103250013 Top-supply connector 1
7 103250015 Swiss thread adaptor for fuel top-supply injector
8 103250016 Coarse thread adaptor for fuel top-supply injector
9 103250018 CNC-601/801 Hexangular stopper
10 104990012 CNC-801 BUICK injector adaptor
Launch X431 CNC-602A Injector Cleaner picture display:
Shipment Notice:
We only ship to the address on Paypal. If you require a specific address to ship the order to, please make sure that you enter this in the Paypal confirmation before confirming payment. We will not ship to any other address under any circumstances. If you need a change in address please contact paypal on "Help Center",click"Call us" or "Email us".You need to tell paypal to send us an email to change to your new shipping address.In this email,there should be your order number ,payment amount,transaction ID,and your new shipping address. Thanks a lot for your kind operation.
Contact information:
Contact Information:
Email: sales@x431tool.com
Whatsapp: +86 13343402337
Scan x431tool.com QR code to order anywhere and anytime by mobile phone
