cart search

2 Years Free Update LAUNCH X431 PRO3S+ SmartLink HD 12V Car 24V Truck Heavy Duty OBDII Bidirectional Diagnostic Tool ECU Coding Active Test 31+ Reset Services

Item No. SH106 In Stock. History 127 sold.

Buy Now: US$1,599.00
US/UK/EU Ship Tax FREE Please Check Here>>>
LAUNCH Update Service Promotion, Up to 40% Off

Looking for a better price or tech support? Please contact:
WhatsApp: +86 18186426016
Free Shipping Express Shipping Service Estimated delivery time: 3-5 Days.See details »
Return for refund within 30 days,buyer pays return shipping. Read details »

Product Description

  1. NEWEST LAUNCH PRO3S+ SmartLink HD Advanced Bidirectional Scan Tool Compatible With 12V&24V Vehicles. Design for Passenger&Commercial Vehicles 2 in 1, work for Cars/ Trucks/ buses/ trailers/ excavators/ diesel engine/ pick-up etc. Support Topology Map, 60+Service, ECU Coding, CANFD &DOIP.
  2. Support diagnose vehicles from 12V to 24 V. X-431 PRO3S+ has an extensive vehicle coverage for 110+ worldwide passenger models and 100+ Commercial models.
  3. TOP VCI Smartlink C2.0 with J2534 Reprogramming,Upgrade Topology,New Energy Battery Pack,8+ High-end functions,Super Remote Diagnostics.
LAUNCH X431 PRO3S+ SmartLink HD 12V Car 24V Truck Heavy Duty OBDII Bidirectional Diagnostic Tool ECU Coding Active Test 31+ Reset Services

LAUNCH X431 PRO3S+ SmartLink HD is an Upgraded of LAUNCH X431 PRO3S+HDIII, LAUNCH top scanner X431 PRO3S+ Smartlink HD ranks No.1 in vehicle coverage.
It can work for cars/trucks/buses/trailers/excavators/diesel engine/construction machinery/pick-up, etc.

LAUNCH X431 PRO3S+ SmartLink HD

LAUNCH PRO3S+ SmartLink HD Highlights:

1. 12V&24V Vehicles ALL IN ONE, 2 Years Free Update.
2. Global version, no IP limitation.
3. Full Bi-directional Control + Over 37 Reset/Service Functions + Topology Mapping
4. Actuation Test + Adaptation+ Matching+ Reset + Initialization +OE-LEVEL Component Matching
5. Programmable Module Installation + Online Coding + SCN Coding
6. Online Account Login Service + Online Calibration + Online Parameterization
7. Anti-theft IMMO Serivce + Guided Functions + Power Balance + Offline Coding + Flash Hidden Functions and etc
8. Extended Modules (Needs to Buy Additionally)
1) X431 ADAS Moblie/ ADAS PRO, ADAS Activation CardCalibrate a wide range of camera-based & radar-based driver assistance systems
2) X431 PROG-3 Key Matching: IMMO For VAG Group Above 3.5, Vehicles that require cloning are not compatible with this accessory
3)  X431 Printer (Print out diagnostic data/ reports.) 7.X431 BST360 battery test.(For Battery Cranking system Test, Battery Charging system Test, Battery Health Test)
4) Launch VSP-600 Video ScopeCheck unseen parts and give you a direct image of the engine, gears, compressors, headers and valves, and body components.
5) X431 TSGUN or Launch X431 i-TPMS (Not only can you use it to activate the sensor's ID, tire pressure, sensor frequency, tire temperature, and battery status; you can also program sensor data to a blank LAUNCH brand sensor in three ways: Auto, Manual, and Activation Copy; at the same time, you It can be used to write the newly programmed sensor ID to the vehicle ECU.)
6) Heavy Duty Module Software (Upgrade of HDIII Heavy Duty Module) -LAUNCH SmartLink C v2.0 Add-on Module is an essential truck module which can turn your X431 scan tools into full function heavy-duty truck diagnostic tools, working on both heavy-duty (Class 4 through 8) and medium-duty trucks (Such as heavy trucks, city buses, bulldozers, excavators, etc.)
7) BST360 battery tester.
With is IMMO Activation software(IMMO Function Authorization), your item: PRO5 ( must use with X431 XPROG-3 GIII Key Matching )will expand the anti-theft function just like IMMO PLUS

PRO3S+ HD Extended Modules

What is the difference between EU Version and Global Version ?

1.EU Version and Global Version support the same functions.
2.The EU Version is designed for European customers and only supports working in the European region ( including Russia and UK).
3.The Global Version has no IP restrictions and can be used worldwide.

LAUNCH PRO3S+ SmartLink HD Product Functions:
1. DEALER-LEVLE ECU CODING WITH J2534 PROGRAMMER and Bi-directional Control

1) ECU Coding: Online Coding/Matching/Calibration/Relearn/Personalization/Retrofit/Customization
With ECU coding functions, LAUNCH X431 PRO3S+Smartlink HD will improve vehicle performance, customize individual customization, refresh hidden functions, disable the annoying functions, reprograms the adaptive data for certain components after repairs or replacements, customized configurations for high-end models,etc to enhance fuel efficiency and ensure safe driving.

- Online Coding: this LAUNCH scan tool can directly access the online vehicle repair data to do high-level repairs.
- Offline Coding: read the code from the original module, and then write the code for the new module,for example ,write a VIN to new ECU.
2) Component Matching: Matching, relearn, Calibration, or initialization adaptive data for certain components after repair or replacements,such as: suspension calibration ,seat matching ,sunroof initialization,gearbox matching,injector calibration, transmission adaption.Delete Adaptation Data, Tank Calibration,Height sensor system calibration,PSM Sensor Calibration ,etc.
- Re-trofit/Modification: for example, re-trofit battery with different type, Upgrading the headlights, taillights, and interior lighting to LED lights,etc.
- Unlock the hidden features:for example,disable auto start-stop, disable daytime running light, disable safety belt chiming ,delete transport mode,delete transmission adaptive value.setting speed limits,etc.
3) J2534 Programming: Pairing with the SmartLink C V2.0 device (serving as J2534-Compliant VCI), you can operate a PC or LAUNCH X431 PRO3S+SmartLink C diagnostic tool to download OEM software and install J2534 files from LAUNCH official website, to perform the J2534 programming for some vehicles. Note: Reach us to get the J2534 Operation manual.
What can this J2534 Programming Function do for you?(1) Operate OEM programming without using the OEM tools(2) Replace ECUs: program blank ECUs(3) Write-in Data: refresh used ECUs(4) Repair missing ECU information(5) Upgrade ECU software version
Audi /VW Firmware Protection Cancel Features:One feature most techs really want is to remove firmware protection from their cars. This feature helps mechanics replace car parts. Carry out car modifications.
(PMI) Pro-grammable Module Installation:Support PMI function,Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace ECU) or initia-lize a module.No need using the J2534 or buying a subscription.
2. Bi-directional Control: ( ACTIVE TEST )
--For cars :Injector Buzz Test/Idle Speed Adjustment/Window/Mirror/Door Lock test/Pump and Valve tests/Fuel Pump/Solenoid valve ,tank Ventilation/Switch/cylinder correction off/on/E.GR test/EVAP test/A/C Compressor Activation/Turn on the radiator fan/Modulate the throttle/cycling the a/c/clutch on and off/Acceleration Device Test,etc .(vary by car model,year)
--For Heavy duty Trucks: Cylinder cut-out test/compression test/injector volume commands/injector programming/S.CR commands/rail high pressure test/S.CR catalyst regen/Cylinder balance test/D.PF regen/VGT calibrations/S.CR commands/Aftertreatment reset/Parameter changing/glow relay activation check/reset the D.P.F filter,etc.(vary by car model,year)
Power balance Test : Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing, is one of the best and easiest ways to find the source of a engine misfire. Furthermore, cylinder power balance testing is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem. **All above are not available for some specific car models. Reach us for details.
ECU CODING WITH J2534 PROGRAMMER and Bi-directional Control

2. 60+ Kinds of Maintenance Functions (Vary By Car Model ,Year)
  1. Oil Lamp Reset Service: perform reset for a new calculation of Engine Oil Life system once changed the oil.
  2. EPB Reset: Help replace and reset the brake pad.
  3. BAT battery service(BMS):Clear the fault information of low battery and make it match again
  4. D.P.F service
  5. SAS Steering Angel Sensor Reset: Reset the steering angle to zero to keep the car running straight.
  6. ABS Bleeding: Help exhaust the air.
  7. Fuel Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity.
  8. TPMS service: Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
  9. Throttle Adaptation: Initialize the throttle actuators to the default state.
  10. AFS Headlamp Reset: Initialize the adaptive headlamp system.
  11. Sunroof Initialization: The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
  12. Suspension Reset:Adjust the vehicle body height sensor for level calibration.
  13. Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.
  14. Gear Learning: Monitors certain camshaft position sensors signals.
  15. Tire Reset:Set the size parameters of the modified or replaced tire.
  16. A/F Reset:Set or learn Air/Fuel ratio parameters.
  17. Adblue Reset(Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
  18. Coolant Bleeding:Activate the electronic water pump.
  19. Language Change:Change vehicle system language.
  20. Nox Sensor Reset:Reset catalytic converter learned value stored in ECU.
  21. Stop/Start Reset:Set up the automatic start-stop function in ECU
  22. Seat Calibration:Calibrate the memory in replaced or repaired seats.
  23. Transport Mode:Deactivate the transport mode.
  24. Windows Calibration:Perform door window matching to recover ECU initial memory.
  25. AC System Relearn/Initialization.
  26. EGR Reset.
  27. Reset Fuel Alcohol Level
  28. Reset Fuel Trim
  29. High Voltage Battery Diagnostics.
  30. GPF Regeneration.
  31. Camshaft/Crankshaft Sensor Relearn
  32. Interactive Vehicle Dynamics (IVD) Initialization Sequence.
  33. Fuel Economy Test
  34. Halt/Resume Transmission Adaptive Learning.
  35. Passive Anti Theft System(PATS)Functions.
  36. Relearn Vehicle Data.
  37. Initialisation Of Automatic Tailgate .
  38. nitialise Power Window Regulators
  39. Seat Standardisation
  40. Normalise Slide/ Tilt Sunroof
  41. Activate Contactless Vehicle Access
  42. Power-Down Command
  43. Autoaddressing Ambient Light BDC.
  44. Unlocking Auxiliary Heater
  45. Drain/ Fill The Refrigerant Circuit
  46. Installation Position Of Flap Motors
  47. ETS Test Of Lithium lon Battery
  48. Register Battery Exchange
  49. Reset Adaptation Values
  50. Adjusting The Electromotive Throttle Controller
  51. Injection Quantity Compensation
  52. Open And Close Radiator Blind
  53. Activate/Deactivate Workshop Mode
  54. Start-Up For Brake Pedal Travel Sensor etc.
Q: Why do i only see 37 service functions on my tablet, when its advertised 60+ service functions ?
A: Actually, you can "quick access" to 37 most commonly used special functions under the main menu "service functions", but the listed commonly used special functions below this menu is obviously NOT ALL special functions you will get from our LAUNCH X431 PRO3S+SMARTLINK HD. YES , You can get 60+ for free as we advertised !! (some car models up to 300+ Special functions (Calibration,relearn, adaption ,initialization,retrofit )
Q: If so , How can I locate the 60+ or even more special functions ?
A: you can locate more than 60 reset functions (special functions) under module/system after you access to your vehicle software . And it's completely free to use permanently.

60+ Kinds of Maintenance Functions



One Tool to Cover 99% of Cars! Compatible with a Wide Range of Vehicles

When choosing an car scanner diagnostic for all cars, one of the most important considerations is how compatible it is with different vehicles. This LAUNCH diagnostic tool has expend vehicle coverage, being well-matched with over 99% of popular cars from America, Europe, and Asia, even the most recent models till 2024.COMPATIBLE WITH CARS/TRUCKS/BUSES/TRAILERS/EXCAVATORS/DIESEL ENGINE/CONSTRUCTION MACHINERY/PICK-UP/HYBRID VEHICLE,etc.

LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 scan tool Commercial vehicle Part :

1)Engine diagnosis 2)Natural gas diagnosis 3)Post-processing diagnosis 4)Calibration function: support Chaochai calibration, Dongfeng Renault calibration, Cummins calibration, Shangchai calibration, Weichai calibration, Xichai calibration, Yuchai calibration, heavy truck calibration, Yangchai calibration, etc.; 5)ECU refresh /re-writing: support Bosch ECU brush writing, Nanyue single pump ECU brush writing, Bosch bottom layer brush writing, natural gas ECU brush writing, electric ECU brush writing, Del-phi ECU brush writing, China National Heavy Duty Truck ECU brush writing, Tenneco DCU Wait;

New CAN FD & DoIP Protocol Supporting (NO Need Adapter)

LAUNCH scanners are always connected with the needs of their customers.2024 Upgraded version of LAUNCH X431PRO3S+ Smartlink HD introduces new protocols CAN FD & DoIP to the vehicle diagnostic process for enhancing vehicle diagnostic speed and vehicle communication rate.

CAN FD standard in LAUNCH X431PRO3S+ Smartlink HD increases bit rate of up to 4 Mbit/s during payload transmission and processes greater quantities of diagnostic data, and saves both time and costs. compatible with GM Models including Onix 2020-2024, Tracker 2020-2024, Suburban 2021-2024, Tahoe 2021-2024, Montana 2024, Silverado 2024, Electra E5 2024, Escalade 2021-2024, Escalade ESV 2021-2024, Sierra 2024, Yukon 2021-202.2/2024, Yukon XL 2021-202.2/2024, and Chrysler Models including Grand Cherokee(WL) 2021-202.3, Grand Wagoneer 2022-2024.

DoIP allows your LAUNCH X431PRO3S+ Smartlink HD scanner to run a 100Mbit/s ultra-faster data transfer rates at a low hardware cost and achieve remote vehicle diagnostics capabilities in all ECUs connected to it. Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later).

FCA Secure Gateway

LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 automotive diagnostic scanner provides a trustworthy authority for technicians, car dealers, automotive engineers, and service shops to undo the SGW and perform all the necessary repair procedures.

Renault Security Gateway Function

Renault Security Gateway Function is used for unlocking Renault’s gateway to perform service functions, active tests, coding, etc. without the need for a dongle or PC. With this feature, the car scan tool X431PRO3S+SMARTLINK HD allows you to pay to perform those functions via one-click on these models (after 2019), such as CLIO V, CAPTUR II, CAPTUR II CN, MEGANE IV ph2, ESPACE V ph2, TALISMAN/SM6 ph2, NEW ZOE, ARKANA CN, XM3/NEW ARKANA, NEW SANDERO/LOGAN, etc.

FULLY LOCALIZED 25 Languages FREE TO USE ? YES ! choose your native language without encountering any sort of language barrier English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Chinese Traditional.

full system diagnostic tool


Level-up Functions added in 2024:
  1. Key Pro-gramming: Add, Delete & Re-program Key; Rewrite smart Keys; All smart Keys lost; Replace smart Key ECU; Replace KNOB IGNITION; Reset Key ;Relearn a Key. (Note:this key programming function is NOT universally compatible .please check compatibility with us if necessary. X431 PRO3S+ SMARTLINK HD 2.0 supports PIN Code reading for most cars before 2008, for vehicles after 2008, you need to have PIN Code to do key pro-gramming.)
  2. ADAS Calibration: Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.
  3. FCA AUTOAUTH: With the new version on LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 , you will have access to the security gateway module on 2017 and newer Fiat/ Chrysler/ Dodge/ Jeep vehicles(2017-2024), so that the diagnostic tool can clear codes, run bi-directional active tests, actuations, relearns, ADAS calibration assistance etc.
  4. DTC Help & Google Search: Just one click "DTC Help"or Code Search"after the DTC shows, save time by putting one by one.
  5. 12-In-1 Live Data Stream Graphing&Export Data as CSV/PDF File: Provides very detailed data stream data, it could include the change of Accelerator Pedal Position Sensor , Actual Output Shaft Speed , Clutch A Actuator Motor , Vehicle Battery and so on. Graphical data allows you to analyze the data changes of each module more clearly and easily, and it is easier to see the problems in it,CSV/PDF file allow you save the data,easy to record and track the vehicle performance.
  6. Tons of Online Maintenance Resources: Including How-to Videos, operation skills, DTC Guidances, and user manual, Q&A, Quick start guide, etc,show you how to use diagnostic tool to solve common faults of some models, such as resetting BMW brake warning lights.
  7. Remote Diagnosis &Feedback: When you encounter a complex car issue that is beyond your ability, you can easily get connected with an expert who is NOT physically present to help you fix it by using “Remote Diagnosis”. And if you have some difficulties or find some bugs during the use of this scan tool, you can send “Feedback” messages to LAUNCH technicians. They will handle the issues promptly.
  8. Diagnostic Report Print&Share: With Launch X431 PRO3S+SMARTLINK HD,you can generate a full system Diagnostic Report by ONE-CLICK. The reports can be emailed to the office or directly to your customer. You can also print out the vehicle health report card.
  9. (PMI) Programmable Module Installation: LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 Support PMI function, Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace ECU) or initialize a module.No need using the J2534 or buying a subscription
  10. V.A.G Guided Functions for Audi, Volkswagen Skoda and Seat,etc: On-Screen Instruction step by step , LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 Automotive obd2 scanner guide you to be an expert in Car Diagnostics even you are a newbie. Thanks to this function , you don’t need to reply on a mechanic’s suggestion all the time.
  11. Auto VIN Scan: 5 Ways for quick diagnose included 1)AUTO -VIN SCAN 2)CAMERA VIN 3)Manually Input VIN 4)Select Area and Vehicle- Automatic Detection 5)Select Area and Vehicle- Manual Selection

5. X431 Remote Diagnostics

This module helps repair shops or mechanics to diagnose a remote vehicle, and launch instant messages, allowing for improved efficiency and faster repairs.

X431 Remote Diagnostics

LAUNCH PRO3S+ SmartLink HD Technical Parameters:

1. Display tablet
Operating system: Android
Memory: 4GB
Storage: 64GB
Screen: 10.1 inch capacitive touch screen with a resolution of 1280 x 800 pixels
Camera: Rear-facing 8.0MP camera
Connectivity: Wi-Fi (802.11a/b/g/n/ac)/Bluetooth/USB
Working temperature: 0℃ ~ 50℃
Storage temperature: -20℃ ~ 70℃

2. VCI module (SmartLink C V2.0)
Working voltage: DC 9~36V
Power consumption: ≤ 6W
Communication: Wireless/Wired connection
Size: 204mm x 110mm x 45mm
Working temperature: -10℃ ~ 50℃

Package List:

1pc x tablet
1pc x  SmartLink C V2.0
6pcs x fuses
9pcs x jumpers
1pc x Jumper 10
1pc x OBD16 connector
1pc x IV 30 connector
1pc x Type II OBD9 connector
1pc x OBD6 connector
1pc x CAT9 connector
1pc x BENZ 14 connector
1pc x RENAULT 12 connector
1pc x ISUZU 20 connector
1pc x VOLVO 8 connector
1pc x MAN 12 connector
1pc x MAN 37 connector
1pc x IVECO 38 connector
1pc x HY-16 cable
1pc x M/F 12+16 cable
1pc x USB cable
1pc x Test cable
1pc x Type C to USB cable
1pc x standard power adapter
1pc x OBD main cable
1pc x power cable clips
1pc x lighter
1pc x For  K-20 adapter
1pc x For  HA-3 adapter
1pc x For  G/V-12 adapter
1pc x For  FD-6+1 adapter
1pc x For  CR-6 adapter
1pc x For  TA-17 adapter
1pc x For  TA-22 adapter
1pc x For  NN-14+16 cable
1pc x For MH-12+16 cable
1pc x For B-20 adapter
1pc x For BZ-38 adapter
1pc x For BZ-14 adapter

PRO3S+ HD Package Includes

Contact Information:

Whatsapp: +86  18186426016

Scan QR code to order anywhere and anytime by mobile phone
Scan QR code to order anywhere and anytime by mobile phone