Product Description
Launch Creader CR3001 is a small size color CReader with complete OBDII/ EOBD Diagnostic funtions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4. It features a 1.77-inch color display and diagnostic trouble codes defining funtion.
Launch Creader CR3001 Full OBD2 Scanner Engine Code Reader
Highlights:
1. Support Multi-Language: English , French , Russian , Spanish ,German, Italian ,Portuguese
2. Easy to Carry: The OBD2 scanner's mini size fits comfortably in the palm of your hand. so that you can carry it around no matter in garage or on a trip
3. Dust Cap Design: protect the connector from dust, water, resistant oil and dirtly , no worries while you donrsquot use it .
4. The Features you need: Color LCD display; View freeze frame data; View graphical and numeric data streams; Sensor tests; Monitored systems tests;No batteries, supply power through OBDII cable.
5. Thoughtful design: All-in-one screen and easy-to-use hotkeys make the CReader 3001 an ideal tool for the DIYer and professional technicians alike.
6. Powerfull Functions: Full OBDII/EOBD Diagnostic Functions. Read & Clear DTCs, I/M Readiness Status, Read Freeze Frame, Read Datastream, Read Vehicle Information, O2 Sensor Test, On board Monitored systems Test (mode 6), Read pending DTCs, Read permanent DTCs, Turns off Malfunction Indicator Light (MIL).
Description:
Launch Creader CR3001 is a small size color CReader with complete OBDII/ EOBD Diagnostic funtions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4. It features a 1.77-inch color display and diagnostic trouble codes defining funtion.
What is different between launch 3001 and AD310?
They all work on MOST 1996 US-Based, 2000 EU-Based and Asian cars, check engine light, I/M monitor readiness test, view live data, view freeze frame data, read and clear codes. view vehicle info. BUT 3001 have more function, it can do O2 Sensor test , Evap system test, On-Board monitor test.
What is different between launch 3001 obd2 scanner and AL319 tool?
They are all obd2 scanner, check engine light, read and clear codes, view freeze frame data, I/M readiness status test, reads live datastream, read vehicle information, misfire test. BUT Compare with al319, launch 3001 can do O2 Sensor test , Evap system test, On-Board monitor test.
Supported Car Models for OBDII Diagnostic Function:
(Note: CR3001 only Support 12V Gasoline& Diesel, Does not support 24V Truck )
1. American Car:
Need Standard OBD2 Protocols from 2000 to now
for Chrysler, for Ford, for GM, For Jeep ...
2. European Car:
Need Standard OBD2 Protocols from 2003 to now
For Alfa romeo, for SAAB ,for Acura, for Opel, for Audi for Seat, for Peugeot, for Renault, For Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Citroen, for Volvo, for Fiat, for VW, for Ford, for Jaguar...
3. Japanese/Korean Car:
Need Standard OBD2 Protocols from 2006 to now
for KIA, for Isuzu, for Honda, for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota...
4. Chinese Car:
Need Standard OBD2 Protocols from 2009 to now
NOTE: if you are not sure whether it support your car , pls contact seller and send your car brand , model and release year , seller will check it for you
Support OBD2 Protocols Cars:
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2 (5 baud init,10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init,10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID,500 Kbaud)
7. ISO15765-4 CAN (29bit ID,500 Kbaud)
8. ISO15765-4 CAN (11bit ID,250 Kbaud)
9. ISO15765-4 CAN (29bit ID,250 Kbaud)
Launch Creader 3001 Features:
Support vehicles 1996 & newer (OBDII &CAN)
Support Protocol IOS9141-2, IOS14230-4, SAEJ1850, IOS15765-4
Coverage for the latest models 1 though 10
Read & Clear DTCs
Read Live Data
Identify VIN information
Views freeze frame data
Turns off Malfunction indicator Light(MIL)
Display monitor test(mode 6)
Read pending fault code
DTC code lookup
Support Full OBD2 functions, Engine Check including:
1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream: Reads and displays live ECU/ PCM data stream, plotting functions graphically and stores freeze frame data.
4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability
Turn Off "Check Engine" Light
Parts might cause your check engine light on include:
1. Gas Cap
2. Oxygen Sensor
3. Air Fuel Ratio Sensor
4. Mass Air Flow Sensor
5. Ignition Coils
6. Spark Plug Wires
7. Spark Plugs
8. Thermostat
9. EGR Valve
10. Evaporatative Emission Canister Purge Valve(EVAP)
11. Catalytic Converter.
If the engine light is not turned off in time
it will Cause Serious environmental pollution, Increased fuel consumption, Increased engine noise. Increased in temperature, ect
How to verify whether the vehicle will pass the emission test with this code reader?
After entering the I/M Readiness, there will be 10 results on the list. Misfire monitor, fuel system, componentmonitor, catalyst monitor, heated catalyst, EVAP system, secondary air sys, 02 sensor, O2 sensor heater EGRand/or WVT. There will be an OK if each of them works fine. [Not all vehicles have these 10 parts]
How to Use Launch Creader CR3001?
Launch Creader 3001 FAQs:
Q: Where is the Data Link Connector?
A: Data Link Connector, that is, OBD2 interface with 16 pin connector, usually locates under the dashboard, or it is under a panel below the handbrake.
Q: What is freeze frame data in an OBD2 scanner?
A: Freeze frame data is the data saved in a scan tool when the malfunction occurs to help to figure out the problem and get it done.
Q: What kind of codes does this car code reader read and clear?
A: This code reader can read and clear current codes, pending codes, permanent codes, generic codes (P0, P2, P3, U0) and manufacturer specific codes (P1, P3, U1).
Q: How to turn off the MIL (Check Engine Light) with this scan tool?
A: The Check Engine Light will be turned off after the trouble codes are cleared.
You can clear trouble codes and fix some problems yourself with this OBD2 scanner, without going to auto service center, which will save you much time and money. If you cleared the code and the MIL comes on repeatedly, you need to go to mechanics for professional help.
Q: How to verify whether the vehicle will pass the emission test with this code reader?
A: After entering the I/M Readiness, there will be 10 results on the list. Misfire monitor, fuel system, component monitor, catalyst monitor, heated catalyst, EVAP system, secondary air sys, O2 sensor, O2 sensor heater EGR and/or VVT. There will be an OK if each of them works fine. (Not all vehicles have these 10 parts)
Specifications:
Screen: 1.77" TFT, 160*128dpi
Voltage Range: 9-18V
Operating Temperature: 0℃ -50 ℃ (32 ℉ -122 ℉ )
Environment Temperature: -20 ℃ -70 ℃ (-4 ℉ -158 ℉ )
Package List:
1pc x Launch Creader 3001
Contact Information:
Email: sales@x431tool.com
Whatsapp: +86 18186426016
Scan x431tool.com QR code to order anywhere and anytime by mobile phone