Anni Sale 2 Years Free Update US/UK/EU Ship LAUNCH X431 PAD Ⅶ Elite PAD 7 Plus GIII X-Prog 3 Advanced Immobilizer & Key Programmer Plus IMMO programmer MCU3 Adapter

Product Description

LAUNCH X431 PAD Ⅶ Elite PAD 7 Plus GIII X-Prog 3 Advanced Immobilizer & Key Programmer Plus IMMO programmer MCU3 kit

NEW-released ultimate scan tool LAUNCH X431 PAD VII ELITE is an unexpected high-end diagnostic tool from LAUNCH, comes with the ADAS calibration function, 39+ service functions, TPMS service, and 8 extended modules functions. New Smartlink C VCI powers technicians a new diagnostic level without the limitation of diagnostic functions, tools, and vehicle types.

- With 1 free Launch CRP123X as gift.
- Time is limited, first come, first served.



Launch X431 PAD VII Elite is an unexpected high-end diagnostic tool from LAUNCH, comes with 13.3" touch screen and 40 service functions, compatible with ADAS calibration function, TPMS service and 10+ extended modules. 
The new SmartLink C VCI powers you at a new diagnostic level without the limitation of a diagnostic tool. Support ECU online programming and coding, Topology mapping, J2534, Full System diagnostic features, CAN FD, DoIP etc, a wide range of advanced functions greatly improves work efficiency.

Launch X-431 PAD VII Elite PAD 7 Highlights:

1. With 2 Years Free Update Online
2. Global Version, no IP Limitation
3. Support Advanced ECU Coding and Programming functions: BMW, Mercedes, VW, Audi, Seat, Skoda, Porsche, Nissan, Infiniti, Subaru. (Can't perform in United States, Canada and Spain)
NOTE: The online programming function has been temporarily deactivated for the U.S. region, and the shutdown will be implemented starting April 1, 2025 for diagnostic equipment in the U.S. market. (EU/UK, Canada and other countries are still normal at this time).
4. Topology mapping gives a visual check on DTCs and all systems' communication status and a guided function for VW and AUDI.
5. Support J2534, CAN FD, DoIP.
6. Full System Vehicle Coverage for U.S., Asian and European Markets Over 110 Brands, Which is Continually Updated.
7. Multi-Language Supported: English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Swedish, Chinese
8. Special Functions Supported: Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS
9. Support Commercial Vehicle and Passenger Car diagnosis ( need extra HD software )
10. Support EV Electric Vehicle Car diagnosis ( LAUNCH X431 EV Diagnostic Upgrade Kit + Activation Card )
10. The New Module "MALL" is Now Available for All Users to Expand and Upgrade their X-431 PAD VII Elite with More Diagnosis Software.
11. The basic functions include read & clear DTC, Bi-directional control, live data graph, wireless software update etc.
12. LAUNCH X431 PAD VII Elite supports ADAS calibration and 10+ extended modules (Extra purchase required):
(So that you can perform more comprehensive vehicle inspections with LAUNCH X431 PAD VII Elite, NEED TO PURCHASE EXTRA)
 

	Extension Modules	Support or Not
1	X431 Heavy Truck Module License+adapters (B Box)	YES
2	ADAS Activation Card (Before expand X431 ADAS Moblie/ ADAS PRO feature, please activate this first)	YES
3	XPROG-3 GIII Key Matching + IMMO license (IMMO functions just like IMMO plus)	YES
4	Key programmer	YES
5	LAUNCH PC Adapter	YES
6	LAUNCH Motorcycle Diagnostic Connector Kit	YES
7	LAUNCH X431 EV Diagnostic Upgrade Kit + Activation Card	YES
8	X431 TSGUN or Launch X431 i-TPMS (Activate all sensors, tpms relearn, program only Launch Sensors)	YES
9	BST360 battery tester (Test Your Battery with Accuracy and Simplicity)	YES
10	VSP600 Videoscope	YES
11	LAUNCH X431 O2-2 Oscilloscope Scopebox	YES
12	LAUNCH X-431 Sensorbox S2-2	YES
13	LAUNCH Non-16 Pin Adaptor Kit	YES

Newly Added Functions:

• Online ECU Programming: Easily reprogram ECU modules on 30+ vehicle brands.
• 3-in-1 SmartLink C Device: Work as VCI to obtain vehicle data; Provide dual diagnostic modes; Act as a J2534 programming device.
• New Protocols: J2534/D-PDU/RP1210 & CAN 2.0/CAN FD/DoIP for faster diagnostics.
• Topology Mapping: Visually show you all system relationships and DTC in color topology.
• OBD PIN Detection: Detect the vehicle protocols and OBDII pin voltage status to help technicians judge the OBD2 interface.
• Diagnostic Plan: Provides a plan to guide you on how to repair based on the currently detected fault codes.
• User Information: A large amount of diagnostic data is well stored in this module, including Reports, Order, Live Data Stream, etc.

NEW Smartlink C VCI
Smartlink C is a new generation intelligent diagnostic box with Linux system independently developed by Launch, which supports multiple communication modes (USB, BT, WIFI) and multiple diagnostic protocols. 
* Support D-PDU / J2534 / RP1210 diagnostic standard, and cover passenger cars and commercial vehicles at the same time
* Support the latest diagnosis protocol of CAN/DOIP / CAN FD
* Support 2.4G/5G dual-band
* Support online upgrade



Hot Diagnostic Functions:

• 39+ Service Functions: Cover various Reset/Relearn/Match/Calibration for 99% of cars.
• Wider Coverage: Serve commercial vehicles and 99% of passenger cars (up to 200 brands).
• Higher Updating Frequency: Timely one-click updating could fix all the bugs and bring newer models.
• VAG Guided Functions: Skip the Security Access Code & Channel Number to perform matching, calibration, and make basic settings.
• Bi-directional Control: Quickly pinpoint the vehicle problems of windows, doors, sunroof, etc.

Superior Hardware Makes Diagnosis Faster Than Ever:

• [5G WiFi Communication] automatically connects within 20 meters, far better than traditional BT connection in transmission rate, diagnostic distance, and anti-interference.
• [Universal Physical Interfaces] include USB Type C, USB Type A, Micro-SD, Micro-SIM slot (LTE version), etc.
• [Core Processor + Android 9.0 OS] enhance the diagnostic speed of the multi-task process.
• [8+256GB Memory] ensures the smooth multi-task operation and keeps all the customer information, diagnostic data & files, and repair recordings.
• [13.3' Touchscreen with 1920*1080] gives you a smoother view experience.
• [IP65 + Corner Protectors] more waterproof and more resistant to falls

Notes:  
1. After 2 Years, Software Subscription click here
2. Can Not Support Online Programming In Spain, Canada, Portugal, Other Countries Won't Have This Problem
3. PAD VII Elite Can Support ADAS Calibration, But Clients Need To Buy ADAS Devices To Make It. Without ADAS Devices, Can Not Do ADAS Calibration by PAD VII Elite Only




1. ALL-IN-ONE Comprehensive Professional Diagnostic Tool, ECU Online Programming and Coding

1) Online Programming for 30+ car brands: all data are saved in a cloud-based server to minimize data loss; operate through a guided menu for stress-free programming.
2) SmartLink C VCI Box: SAE J2534-1 & -2 compliant pass thru reprogramming interface device; get cost-effective access to OE programming downloads from vehicle manufacturers (need a subscription of their software), replace outdated ECU software/firmware, and program new ECUs.
3) Backup/Recover ECU Data: generate programming & coding backup data saved as a file supporting your recovery of car functions. (EX.CLUSIVE on the market)
4) Manual & Automatic Options: online servers send the values automatically for quick and precise procedure; or you can make options manually for more customized car builds.



Why is the LAUNCH X431 PAD VII Elite scan tool more powerful than another diagnostic tool?

- Online programming tool X431PAD VII Elite does not require an expensive online account, just connect to WIFI, saving maintenance costs.
- The smart box adopts dual WIFI communication to improve programming speed, thereby reducing the possibility of programming errors
- When using the J2534 tool, in addition to the connector, it is also necessary to consider issues such as adapting the computer, installation costs, and complete functions, which are not cost-effective.
 
Reliable ECU Data Backup, Faster Recovery & Less Downtime


When customizing your vehicle, there is always a question: will it be able to revert the changes in case of human error, system failure, or data loss that bricks the vehicle computer?
This is where the “Backup/Recovery ECU Data” function can prove to be very useful.
Unlike traditional car scanner backup methods that can be labor-intensive and inconsistent, LAUNCH X431 PADVII provides a simple mechanism to back up all your ECU programming & coding data.
It allows you to make a copy of your current Coding, Adaptations, and other info (such as Advanced ID and Live Data) of a selected control module, and save them as a file into your scan tool as a backup.
To restore coding or programming values, just select the backup file you need and you’ll effortlessly get reverted back to the old settings/coding in a control module.
For now this function is compatible with Ben.z all series, and B.M.W F/G/I chassis.
**NOT universally compatible. Function menus may depend on the vehicle’s make, model, and year.
Programming Online for Benz & BMW, Save Your Labor Greatly

LAUNCH stores the Benz & BMW’s massive programming data in the cloud, rather than relying solely on a hard drive, so you won't lose access if something happens to your hard drive.
Moreover, LAUNCH PADVII saves time to guide your programming directly. Unlike any scan tools before, it practically anticipates your next move by guiding you through every step you need to find the solution patch while avoiding the steps you don’t, within a highly intuitive user interface that’s simple to learn and operate.
With this automatic Online Programming, you’ll have the confidence to tackle more challenges than ever before. The only requirements are a stable & solid internet connection, and an external battery charger for your successful operation.

Q&A>>>>
1) Can I use the diagnostic tool to program Audi, VW, Porsche … besides Benz and BMW?

Answer: Yes, provided you have installed, and downloaded the manufacturer’s programming software, and paid for the valid subscription.
With SmartLink C VCI Box (compatible with J2534-1 & -2; value of 2000+ bucks), you can cost-effectively add new OEM applications for 30+ car brands, with no need to purchase separate, expensive OE scan tools for each brand.

2) What happens if I don't program a new ECU after installing it on my car?

Answer: Nothing will happen, because the system doesn't know how to react, since the PROM that governs the circuits of ECU “what to do” is blank.
It cannot command the injectors to open or the coil(s) to fire. It cannot command the fuel pump to send fuel. It cannot read the external temperature, or even the temperature of the coolant, because there are no instructions defining what is hooked to the ECU, and there is no information to tell the system when to open the injectors, or for how long.

Please note:
Online Programming: **Please reach us to get the "X431 PADVII online programming activation method".
J2534 Reprogramming: **Note: Reach us to get the J2534 Operation manual.



Click here for more info about PAD VII elite>>>>>>>>>>>>>>>>>>>>>>>


Launch X431 GIII X-PROG 3 Advanced Immobilizer & Key Programmer XPROG 3 Chip Reader

X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.



X-431 GIII X-PROG 3 Highlights:

*** Ship From US/EU/UK, fast delivery, Free tax!
*** LAUNCH Official authorized dealer, 100% original

1. All-in-One Key Programmer. Integrates Multiple Function Models.
2. Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
3. Compatible with Multiple X-431 Series Diagnostic Tablet: X431 Pros Star, Pros Elite, PRO ELITE, Pro3 V5.0 (V+ V5.0), PROS V5.0,  Pro3S+ V5.0, LAUNCH PRO5, PRO TT, PRO3 ACE, PRO DYNO, PRO3 APEX, PAD II, PAD V, PAD VII, PAD V (PAD V ELITE), PAD VII ELITE, Immo PAD, Immo Pro, Immo Plus, Immo Elite, X-DIAG Pro3 etc.
*X431 V/ V+ 1.0-4.0/ Pros v1.0 with X-PROG3 CAN NOT ADD extra IMMO software. Please check here for more information. 
*Only the NEWEST version can support with X-PROG3 ADD extra IMMO software, such as X431 Pro3 V5.0 (V+ V5.0), PROS V5.0,  Pro3S+ V5.0, X431 V V5.0 and etc.

4. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
5. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
6. Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
7. For key programming, Xprog-3 is not for keys, it is mainly for cloning data. IMMO software is required for key programming.The IMMO LICENSE please check here.
8. NEW!!! Update VAG MQB NEC35XX D70F3524, D70F3525, D70F3526, D70F3529, D70F3532, D70F3537 add key & all keys lost 
9. NOTE: If you try to update key programming software and firmware on Launch X431 IMMO Plus/ Elite/ PAD V/ PAD VII, you must connect this key programmer with tablet, otherwise it will give error device no response.
10. - To use MCU3 Adapter, you must have Launch Xprog-3 GIII Adapter, if you do not have Xprog-3 GIII, you can buy this bundle to save your money.
      - The mcu3 adapter is not included with the xprog3.  

Note:
*X431 Pro5 SmartLink (new) has a Type-C connector that can directly connect with X431 X-Prog3 to perform ECU & TCU clone function.
*X431 Pro5 SmartBox (old) doesn't have a Type-C connector, but you can buy an extra OTG USB Micro to USB-C Adapter to work with X-431 X-Prog3 to perform ECU & TCU clone function.
*X-PROG3 will connect PAD VII/PAD V/Pro5 and IMMO series (IMMO Pro/IMMO Elite/IMMO Plus) via USB, for other X431 tablets, only Bluetooth or WiFi connection. 
*To clone ECU or TCU with X-PROG3, you need PAD series or IMMO tablet series tools. CRP919 BT/ X431 V/V+/Pros v1.0 with X-PROG3 cannot do ECU/TCU cloning. 

Launch X-PROG 3 Main Functions:

• Supports MQB.
• Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
• Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
• Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
• Update VAG MQB NEC35XX D70F3524, D70F3525, D70F3526, D70F3529, D70F3532, D70F3537 add key & all keys lost NEW!!!
• X-PROG 3 enables reading and writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
• X-PROG 3 enables anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.
• More than just key programming — The LAUNCH XPROG 3 also supports advanced coding/programming functions: - ECU replacemetn for 4TH Generation Audi (0AW/0B5) gearboxs. - Reading, writing & cloning of the ECU for 4TH Generation VW UDS engines. - BMW E chassis 8HP gearbox ECU program wiping,.etc.

Extended function (need to purchase extra):
- Use with MCU3 adapter to do Benz All Keys Lost and ECU TCU Reading.
- Use with Launch RH850 Adapter for Renesas Encrypted RH850 MCU Read and Write 
- Use with Launch ECU Bench Adapter for Renesas Encrypted RH850 MCU Read and Write 
- Use with X431X-PROG3 PC Adaptor Support Read/Write ECUs Data And Engine Data Validation
- Use with Gearbox Cloning adapters Faster connection without mcu3 adapter or a bundle of adapters.  
- Use with Toyota emulator key: can collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip.
- Use with Toyota All Keys Lost Adapter Kit Include with CH-01 H Non-Smart Key, CH-02 24-PIN and CH-03 27-PIN Adapters
1) Toyota 27 pin smart key AKL cable Support For Toyota 4A, 8A-A9, and 8A-AA smart keys all lost (dismantle and read the immobilizer box)
2) Toyota H non-smart key AKL cable Program Toyota 8A mechanical keys all lost. The applicable models are: 2014 onwards Corolla, Levin, Camry, Highlander, and Prado
3) Toyota 24-pin smart key AKL cable  Support Dismantle And Read The IMMO Box for F15/F18 smart keys, 2019 onwards such as Highlander, Alphard, and Vellfire, equipped with TMLF12 smart box
- Use with X431 Key Remote Maker support to Read Transponder, Generate Transponder, Detect Frequency, Detect Ignition switch coil signal, Generate Remote (Launch X431 remote), and Unlock Toyota smart key, etc functions.

Launch X431 G-3 Core Functions:
Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
Supports the BMW CAS4/ CAS4+ module replacement.
Supports the ECU cloning and replacement for BMW Siemens engines.
Supports ECU replacement for the fourth-generation of VW/AUDI engine;
Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
Erase the password for Mercedes-Benz engine and gearbox within 3S.11.
Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).



What is the difference of Launch X-PROG3 and X431 Key Programmer?

Launch X431 Key Programmer can support to Read Transponder, Generate Transponder, Detect Frequency, Detect Ignition switch coil signal, Generate Remote (Launch X431 remote), and Unlock Toyota smart key, etc functions.

Launch X-PROG 3 diagnostic function supports key programming, engine and gearbox replacement for various of vehicles, you can retrieve ECU information, read, erase, and write in for a range of chips.
Compatible with X-431 series Launch Tablets, X-PROG 3 enables IMMO type identification, Remote control matching, Key chip reading & matching, key password reading and IMMO component replacement.

In summary:

Both of X431 Key Programmer and X-PROG3 can not use standalone, needs to use together with X431 series device.

But X431 Key Programmer is remote maker indeed, not immo programming tool. If you want to do immo programming to add new key, then add IMMO license for your X431 device with X-PROG3.
Or use with IMMO Plus, IMMO Elite Launch professional key programmer.

X-PROG3 is good tool to work with X431 series to do immo programming. But x431 key programmer is tool for remote.

Launch X-prog3 compatible keys:
1. Original Keys (OEM keys)
2. Launch dedicated universal remote keys
3. Xhorse Autel Keydiy universal keys (generated by the corresponding remote makers.)

Launch GIII X-Prog 3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/ writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code. 
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated. To check detail X-PROG3 Immobilizer key programming list, check list on the official website.

• Read/write for BMW CAS4+ and FEM chips
• Reading and writing car key chip
• Read for BMW engine ISN code
• Read/write EEPROM MCU....

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: PRO ELITE/ PROS ELITE, X-431 V, X-431 V+, X-431 PAD V, X-431 PAD VII, X431 PRO5, X431 PRO3S+ V5.0, X431 Pro3 Apex, Immo PAD, Immo Pro, Immo Plus, Immo Elite, X-DIAG Pro3 etc.
5. Reads & writes most Engine/ Gearbox ECUs without disassembling the shell


Launch GIII X-Prog 3 Advantages:

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).
Click here for more info about XPROG-3>>>>>>>>>>>>>>>>>>>>>>>
 

Launch X431 MCU3 Adapter for X-PROG3 GIII Work on Mercedes Benz All Keys Lost and ECU TCU Reading

To program Mercedes all keys lost with X431 V, X431 V+, Pro5, Pros, Pro3S, X431 PAD V, PAD VII and X-PROG3 GIII, you will need to connect the MCU3 adapter to X-PROG3 correctly.



Adapter board code: 307140131
Equipment configuration: non-standard accessories, optional.

Applications and advantages of the new MCU3 adapter:

-ADAS Advanced Driving Assist System
-Audi VW MQB gearbox replacement
-BMW continental msv90 engine ecu replacement and cloning
-Peugeot Key Programming
-Mercedes Benz transmission deleted and operating instructions vgs nag2 vgs2 nag2 and vgs3 nag2
-Mercedes Benz w164 2009 Key Programming
-Volkswagen Audi 5th generation engine reading engine data via direct connection and online programming and coding
-For BMW E chassis 8hp EGS deleted
-BMW 8hp chassis F and G delete function
-Key programming cas4/cas4+ all keys lost and adding keys
-Programming cas1 cas2 cas3 cas3+ lost keys and add key
-CAS4 immobilizer module replacement
-Replacement of Volkswagen Audi engine and reading data med17 and edc17
-Mercedes Benz med9.7 ecu deleted
-Volkswagen Audi Replacement 4th Generation Instrument Replacement
-Engine replacement for Volkswagen Audi MED17.5.22
-Programming of lost keys and adding key Porsche Cayenne 2011 2017
-Cloning and virginization e39 ac delco
-Power shift cloning and virginization
-Nissan ecu and Tcm conversion and virgin ecu programming and calibrations
-Special features in Chrysler and registration at autoauth FCA sgw
-Special features in GM and Ford 


Package list:

1set x Full set Launch X431 Pad VII
1set x Full set Launch X431 Xprog 3
1set x Full set Launch X431 MCU3  

---

Contact Information:

Email: sales@x431tool.com
Whatsapp: +86  18186426016


Scan x431tool.com QR code to order anywhere and anytime by mobile phone


- Ship from US/EU/UK Overseas Warehouse. Fast Delivery & Tax Free.
(Not for all products, please check US/EU/UK tag or Ship from US tag)
Normally takes 2 working days to process the order, and about 3-5 working days to deliver

Below is a timeliness forecast for shipments from our various warehouses:
- US Warehouse was located in the USA and it only can ship to US country; Canada and Mexico have a few addresses that support US shipping, and the rest need to be shipped from China.
- EU Warehouse was located in Germany/Czech and it only can ship to EU (European Union) country.
- UK Warehouse was located in the UK locally.
- China: If US/EU/UK is out of stock, your order will be shipped from China via DHL, YANWEN (No Tax) or Yun Express(No Tax) by default.
- Order Under $150 normally with default shipping standard post, customers can tick for premium delivery to choose ship by DHL.

For any questions, please contact us at:

• Whatsapp: +86 18186426016
• Email: sales@x431tool.com