The newest Launch X431 PRO5 Smartlink, the innovative revolution of intelligent diagnosis. It opens the era of dual diagnostic modes (local diagnosis and SmartLink remote diagnosis).
X-431 PRO 5 not only inherits the powerful diagnostic strength of PRO series, greatly developed its advantages like J2534 Programming, BMW & Benz ECU online programming, Topology Mapping, 50+ Reset Functions, Bi-directional Control, Online Functions, ECU Coding, All System Full-Function Diagnostics, etc.
Supports SmartLink 2.0 remote diagnosis and specialized detection equipment, with features not limited to the diagnostic functions of the device under control.
Launch X431 PAD VII Elite is an unexpected high-end diagnostic tool from LAUNCH, comes with 13.3" touch screen and 40 service functions, compatible with ADAS calibration function, TPMS service and 10+ extended modules.
The new SmartLink C VCI powers you at a new diagnostic level without the limitation of a diagnostic tool. Support ECU online programming and coding, Topology mapping, J2534, Full System diagnostic features, CAN FD, DoIP etc, a wide range of advanced functions greatly improves work efficiency.
With 1 free Launch CRP123X as gift.
Time is limited, first come, first served.
LAUNCH X431 PRO3 V+ 5.0 Elite(Same as PRO3S+ Elite) based on Android 10.0 system, has been upgraded both in terms of software and hardware, and has more outstanding performance than the X431 PROS V 5.0 and V+ V5.0.
LAUNCH scan tool X431 PRO3 V+ ELITE has inherited all the strengths of its predecessors and greatly developed its advantages like J2534 Programming, 50+ Reset Functions, Bi-directional Control, Online Functions, ECU Coding, All System Full-Function Diagnostics, etc.
Launch X-PROG 3 work with Launch X-431 series Tablet, Enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading, and anti-theft component replacement.
X-PROG 3 supports key programming, engine and gearbox replacement for various of vehicles, you can retrieve ECU information, read, erase, and write in for a range of chips.
Launch X-prog3 compatible keys: 1. Original Keys (OEM keys) 2. Launch dedicated universal remote keys 3. Xhorse Autel Keydiy universal keys (generated by corresponding remote makers.)
Launch X431 IMMO Plus key programmer is a new generation of 8-inch automobile special IMMO matching tool with high configuration and super performance. The host is developed based on the Android 10.0 open system, adopts a 2.0Ghz 4-core high-efficiency processor, 4GBRAM+64GBROM large storage, and is equipped with a high-endurance battery, which make the diagnosis faster, more stable and more durable.
Launch X431 IMMO Key Programmer Remote Maker with Super Chip and 4 Sets of Smart Keys is used to identify car key chips and generate various types of chip models from super remotes, read the remote control frequency of car keys, and generate remote control devices for different car models from various types of super remotes. Support X431 IMMO Elte, IMMO Plus, PAD V, PAD VII, and ect.
Professional immo programming, with X-prog3
2 Years free update and multi-language
Supports CAN FD and DoIP Protocols
All system diagnostic + Active Test (Bi-Directional Control)+ 39 Reset Service Functions
Launch X431 CRP919X OBD2 All System Diagnostic Tool with 31 Service 2025 Bi-Directional Scan Tool Added TPMS & BST360, ECU Coding, CAN FD/DoIP
2-Years Free Update Online
LAUNCH PRO3S+ SmartLink HD Advanced Bidirectional Scan Tool Compatible With 12V&24V Vehicles. Work for Cars/ Trucks/ buses/ trailers/ excavators/ diesel engine/ pick-up etc.
Support Topology Map, 37+Service, ECU Coding, CANFD &DOIP.
X-431 PRO3S+ has an extensive vehicle coverage for 110+ worldwide passenger models and 100+ Commercial models.
TOP VCI Smartlink C2.0 with J2534 Reprogramming, Upgrade Topology, New Energy Battery Pack,8+ High-end functions and etc.
For X431 V, X431 V+, Pro5, Pros, Pro3S, X431 PAD V, PAD VII
MCU3 adapter for more functions of X-PROG3 programmer as readings of new ECUs TCM, Mercedes all keys lost etc
CRP129 HD is a diagnostic tool with internet access for Heavy-Duty Vehicles, supporting the basic diagnostic of 50+ car makes software, supporting the full-on diagnostic functions of the all systems.
CRP129 HD heavy duty truck scan tool's major advantages: All System Diagnosis, 7 Resets, Full HD OBD/EOBD2, Auto VIN&Scan, 4-IN-1 Live Data Graphing, Online Feedback & Remote Assistance, Upgraded Hardware and etc.
LAUNCH X431 V+ V5.0 is a typical diagnostic device contributed by Launch to diagnostic industry concerning Internet application, which is a 10.1-inch advanced smart car diagnostic device developed based on Android 10.0 system. It uses a 2.0Ghz 4-core high-efficiency processor, 4GB RAM + 64GB ROM large storage, and is equipped with a high-endurance battery. It runs faster, more stably and lasts longer. V+ not only supports passenger car diagnosis but also supports commercial vehicle expansion modules, making the diagnostic function more powerful. X-431 PRO3(V+ 5.0) covers more than 98% of the cars on the market.
Newest LAUNCH scan tool CRP919X BT loads super Android 10.0 OS & 4+64GB memory, which is an upgraded version of CRP919X.
With Bluetooth connectivity, you can quickly transfer diagnostic information and no more limitations by the cable length.
Added repair functions, Bi-directional control (Active test), 20000+ worldwide models, New Protocols DoIP & CAN FD, 2-Year Free Update, ECU Coding, 35+ Reset Functions.
This is only two years Renewal Card Sevice for All Launch X431 12V Car Diagnostic Software. With this service to extend another 2 years free update. No need shipping.
Suitable For Products: LAUNCH X431 Diagun IV, X431 Diagun V, X431 V, X431 V+, X431 Pro mini, X431 Pros mini, X431 PRO3S+, X431 PRO 5, PRO3 APEX, IMMO ELITE...
The LAUNCH X431 PAD VII Elite comes with ECU Online Programming, Topology mapping, ADAS calibration function, 50+ service functions, TPMS service, and 10+ extended modules functions.
With the help of GIII X-Prog3 and MCU3 Adapter, it enables read/write keys, Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement and support Mercedes Benz All Keys Lost and ECU TCU Reading
Launch CRP 919E BT is a new generation of 7-inch automotive intelligent diagnostic equipment with superior hardware and super performance. Equipped with the latest DBScar VII Bluetooth diagnostic connector on the basis of CRP 919E. It's a All-in-One Full System Diagnostic Scanner with 35+ Reset Functions, ECU Coding, CANFD&DOIP, VAG Guided, 2 years free update and etc.
[Global Version] Launch X431 PRO Elite is the new released all-in-one automotive car diagnostic scan tool with Read ECU, Full System, 32+ Resets, Key Program, VAG Guide and ect. At a lower cost, Launch obd2 scanner X431 PRO ELITE combines all the hot functions of comprehensive scanners according to the customer's favorite need.
X-431 PAD V ELITE (PAD 5) is a high-end comprehensive diagnostic scanner with charging base newly developed based on the Android 7.1. It supports dual 2.4GHz & 5GHz Wi-Fi communications, with features such as wide vehicle model coverage, powerful diagnostic functions, and accurate test data. Its IP65 case has exceptional damage resistance for water and dust, which will make workshop work easier and more comfortable. All these unique features will offer you a luxury experience of vehicle diagnosis.
![[US Ship] 2025 Launch X431 i-TPMS Tire Pressure Detector Upgraded of TSGUN Work with X431 V, V+, PRO3S+, Pro3, Pro5, PAD V, PAD VII, ect](/upload/pro-sm/25111317630327007819.jpg)
Work with X-431 diagnostic tools like X-431 V/ X-431 V+/ X-431 Pro TT/ X-431 Pro3 ACE/ X-431 Pro5/ X431 Pro3S+/X431 ProS 1.0/ X431 Pro Elite, Pros Elite/ X-431 PROS V5.0/ X431 PRO3 APEX/X-431 PAD III/X-431 PAD V/ PAD VII/ CRP919E BT, CRP919X BT to expand new functions and generate new revenues for X-431 users.
Launch X431 i-TPMS (TSGUN) support to activate TPMS sensors, Read sensor data, TPMS diagnose, Read/clear TPMS DTCs; Scan TPMS sensor ID, program tpms sensor.
Launch X431 SmartLink C V2.0 Heavy Duty Module work with Launch X431 V+, X-431 PRO3S and X431 PRO5 series. It's the upgrade version of Launch HD III heavy Duty Module, which the transmission speed is faster and more stable, and the visual operation interface makes it more convenient.